Safety precautions

To use the printer safely

WARNING

There are high voltage electrodes inside the printer. Before you clean the inside of the printer, make sure that you have turned off the power switch and unplugged the printer from the AC power outlet.

DO NOT handle the plug with wet hands. Doing this might cause an electrical shock.

Always make sure the plug is fully inserted.

After you have just used the printer, some internal parts of the printer will be extremely hot. When you open the front or back cover (back output tray) of the printer, DO NOT touch the shaded parts shown in the illustration.

Inside the printer
(Front View)

Inside the printer
(Back View)

DO NOT remove or damage the caution labels located on or around the fuser.

DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner dust to ignite inside the vacuum cleaner, potentially starting a fire. Carefully clean the toner dust with a dry, lint-free cloth and dispose of it according to local regulations.

DO NOT use flammable substances or any type of spray to clean the inside or outside of the machine. Doing this may cause a fire or electrical shock.

CAUTION

Cleaning the outside of the printer:

•	Make sure that you have unplugged the printer from the AC power outlet.
•	Use neutral detergents. Cleaning with volatile liquids such as thinner or benzine will damage the outside surface of the printer.
•	DO NOT use cleaning materials that contain ammonia.

Page Top